ROLL OVER BARS


Lolocost produce roll over bars to suit the standard and wider chassis. Basically, if you have the standard chassis it is 42 inches wide. To be correct the roll over bar should not be as wide as this so as to look correct and have room for the twin hoop hood frame to sit along side it and not encroach over the side of the body. In this case we would recommend our standard, popular roll over bar which is 972mm (38 ¼ inches) wide and has parallel legs of ample length so that it can be fitted at any height to suit the driver. However, if you are of normal height, 6 foot, and fit the standard seat then if it is cut to a height of it looks cosmetically correct and is a few inches above your head. Most importantly it will fit under the Lolocost hood, which is planned for the future.
All roll bars are 50mm o/d, 2.6mm wall thickness.


OTHER ROLL OVER BARS AVAILABLE

As above but 1000mm wide.

Also popular are the single hoops similar to those which are popular with the Cobra enthusiast. Sold singularly at £20 each or £30 for a pair. 50mm i/d tube, top radius , width of legs at bottom .

Back stays 38mm i/d, 2mm wall thickness at £4 pair.